Brilliance 5 Litre Sealer Finish

Brilliance 5 Litre Sealer - Finish

Benefits:

• Reduces scuffing on floors
• Extended wear life
• Ultra high gloss levels
• Fast drying and extremely durable
• Leaves a deep, clear finish
• Non yellowing-resists discoloration
• Excellent levelling properties

Brilliance® Sealer/Finish is a new generation, one-step, high gloss polish that provides an amazing “wet look” finish for use on most hard floor surfaces including: terrazzo, vinyl tiles, granite, vinyl sheeting, tiles and slate.

Brilliance® has improved scuff resistance and even higher gloss levels. You will see an improvement in the durability and life span of the floor. By any measure Brilliance® is one of the best floor polishes on the market.

Brilliance® is available in 5L bottles.

Slip resistant rating D1 classification as per AS4586:2013

DIRECTIONS FOR USE:
STRIP: all of the old polish and sealer using a Whiteley Industrial stripper (zip strip, storm or hornet) ensuring to follow all procedures and directions as per label. Pick up all remaining residue and rinse area with a solution of Tempo HD at a dilution rate of 1:20. After the stripped surface is dry and has been swept the surface is now ready to seal.
SEALING: Apply first coat of Brilliance using a clean applicator, allow 15-30 minutes drying time between coats. (This may vary depending on airflow and drying conditions.) Apply a further 3 coats of brilliance ensuring each additional coat is laid on a dry surface. If using Pafu Base as a base for Brillianc, apply 2-3 coats Pafu Base followed by 2-3 coats of Brilliance. Buff after applying Brilliance.
CUTBACK AND RECOAT: Sweep area to be cutback. Mix a solution of Tempo Hd at a dilution of 1:60, using an autoscrubber fitted with blue or black pads depending on condition of floor, lay solution onto surface and allow to work for 4-5 minutes, no longer. Pick up all solution with second pass of autoscrubber and complete a total rinse if the surface with clean water ensuring all residue is gone. When dry, buff the surface to enhance durability and gloss, sweep floor to remove all dust. Apply 2-3 coats of Brilliance using a clean polish applicator. Always allow each coat to dry before you lay the next coat. If time permits always buff last coat after it is dry to assist with curing and also enhance gloss and durability.
DAILY MAINTANCE: Sweep floor daily, mop and scub floor with Tempo HD at a dilution of 1:20 with water, twice a week use Glokleen to provide extra wear and durability and also help increase slip resistance. Buff daily.