Browning Remover Concentrate 1L

Browning Remover Concentrate 1 Litre

Sonitron Browning Remover is an oxidizing type browning remover. Its active oxygen source completely evaporates leaving absolutely no active residues making it first and safest choice for all cellulosic browning and tannin stains.  

• OXIDIZING REMOVER  
• NO RESIDUE 

Directions: 
Browning Remover is a ready for use product for the removal of heavy cellulosic browning. It may be diluted at up 1part Browning Remover to 10 parts water for light browning.

For small stains:
Always test in an inconspicuous place. Apply Browning Remover using spray or applicator cloth or brush. Gently brush in or use a tamping brush to allow the product to fully engage the staining material. Allow several minutes dwell time before blotting away with an absorbent cloth. Rapidly dry the treated area to a finish using a hair dryer. Repeat procedure as long as stain is responding.

For larger areas and Water damage restoration:
Apply Browning Remover at its tested safe maximum. Agitate with brush or groomer to allow penetration of the pile. Allow several minutes dwell time before extraction. Rapidly dry affected areas using airmovers or fans.

For best results:
Use Browning Remover at the maximum safe test dilution rate. Allow a reasonable dwell time for the chemistry to work. Use a tamping brush to work product into fibre. For larger areas use a bonnet or rotary brush to work Browning Remover into the fibre. Pay particular attention to extreme edge of water tide marks where the browning material concentrates. Use a "dry and re-apply" repeat method for complete removal. To avoid unnecessary reattendance do not leave site until final application has dried.